All About Apple USB Modem

All About Apple USB Modem

there's a bunch of commonly asked questions about apple usb cable,here's answer to your most asked questions

What Macintosh computers are compatible with the Apple USB modem?

The Apple USB modem requires Mac OS X v10.4.3 through Mac OS X v10.6.8 running in 32 bit mode. If your Mac has an earlier version of Mac OS X v10.4, upgrade your computer's operating system using Apple Downloads or Software Update.

Important: The Apple USB modem is not supported with OS X Lion or later.

Can I use the Apple USB modem if my Macintosh already has an internal modem?

Yes, but you can only use one modem at a time. Make sure you've selected External Modem in the Internet Connect application if you want to use your Apple USB modem instead of your computer's internal modem. The Apple USB modem's preferences can be seen in the Network pane of System Preferences. From the Show menu, select External Modem.

Does the Apple USB modem work on Windows machines?

The Apple USB Modem is not supported on computers running any version of the Microsoft Windows operating system.

Will the Apple USB modem work when attached to the USB port of an ADC display or when attached to an external USB hub?

It is not recommended to attach the Apple USB modem to the USB port of an ADC display or to an external USB hub. This modem works most reliably when connected directly to your computer.

How fast does the Apple USB modem operate?

The Apple USB modem's maximum speed is 56 kilobits per second (kbps) for data transmission and 14.4kbps for FAX. The speed the modem operates at depends greatly on the quality of the phone line transmission, so speeds may vary.

What standards does the Apple USB modem support?

The Apple USB modem is K56 Flex compliant, and supports the V.92 protocol, supporting caller ID (if enabled on the phone line), wake on ring, and telephone answering (V.253) on hold.
Compatible ISP and telephone services required.Your ISP may not support all V.92 features. Modem will function according to V.90 standards if V.92 services are not available.

What comes in the Apple USB modem box?

The box contains an Apple USB Modem with built-in 4.6-inch USB cable and a User Guide.

http://comphow.blogspot.in/

Making a wireless home network connection in Windows XP without a router

Making a wireless home network connection in Windows XP without a router

Wirelessly networking a second or third computer without a wireless router or a standalone wireless access point (WAP) is considered an ad hoc wireless network. You can build an ad hoc 802.11b wireless network using the graphical user interface in Windows XP. Here's how to add Internet Connection Sharing on the host computer and set up an ad hoc wireless network

Configuring the host computer

You'll first need to install an 802.11b wireless card in the main computer and configure it as a computer-to-computer (ad hoc) wireless connection. After you install an 802.11b adapter on a computer, Windows XP will automatically detect the card, install drivers, and display an icon in the notification area. If the computer is in an environment where other wireless networks are in range, Windows should display a list of available networks automatically. However, if no wireless networks are in range, the wireless connection icon may display a red “X” and may not automatically open a View Wireless Networks window. To open this window, click the icon for the wireless connection.

Do not select an available network at this time if any are displayed in the Available networks listing. If your computer previously connected to a preferred access point, remove all preferred access points. This will ensure that a connection is made only to the ad hoc network that you are trying to configure.

Click the Advanced tab at the top of the window. Select Computer to computer (ad hoc) networks only and clear the Automatically connect to non-preferred networks box if it is selected. This setting, along with removing preferred networks, ensures connection to the ad hoc network only.

Click the Wireless Networks tab again. Under Preferred Networks, click Add. In the Wireless Network Properties dialog box, specify a Network name (SSID). Use any name desired, but be sure to use it to configure all computers. Note that the network type is already marked as a computer-to-computer network and that this cannot be changed since it has already been specified that a connection should be made to only ad hoc networks.

After configuring the network name (SSID) in the Wireless Network Properties dialog box, the new ad hoc network will be displayed with a PC Card icon to designate that this is a computer-to-computer network

.

Configuring a client computer

After installing an 802.11b Silver PC Card in a second computer, the Wireless Networks tab displays a list of in-range wireless access points or ad hoc wireless networks.

The new ad hoc network should be listed. Highlight the network name, and then click Configure. Because WEP will not be configured at this time, click OK

Sharing the connection

Follow these steps to share the connection:

1. Click Start, click Control Panel, click Switch to classic view, and then click Network Connections.
2. Click the connection to be shared, and then, under Network Tasks, click Change settings of this connection.
3. Click the Advanced tab, and then select the Allow other network users to connect through this computer's Internet connection check box.
4. If you are not using a third-party firewall and have not already set up the Internet Connection Firewall, select the Internet Connection Firewall (ICF) check box to enable this feature.
5. Enable the setting to let other users control or enable this connection.

After completing ICF configuration, the Network Connection window on the host computer will display the original wired Ethernet connection and display the status as Shared as well as Enabled. The Network Connection window on the client computer will display the connection on the host as an Internet Gateway.

The client computer(s) should now receive a private class, non-routable IP address in the 192.168.0.* address range via DHCP from the host computer and should have full Internet connectivity.

Configuring WEP

If connectivity has now been established successfully, return to Network Properties and configure WEP settings to ensure security for the ad hoc network.

On the host computer, open the Wireless Network Properties dialog box and select the Data encryption (WEP enabled) check box. Consult the documentation provided by your wireless card manufacturer for the key format and key length.

Use the highest level of encryption possible (key length) that is supported by your hardware and drivers. Be sure that if you use an ASCII network key that you pick random characters and letters that can't be easily guessed. The final step is to use the same key and encryption settings and configure the client computer(s).

Must Note

• For additional security, consider changing the key on a regular weekly basis.
  
  
  
  http://comphow.blogspot.in

.

Pinning apps to your taskbar in windows 8.1

Pinning apps to your taskbar in windows 8.1

Whether you're using touch or a mouse, you can pin any app to your taskbar so it's easy to open when you're in the desktop.

Step 1

On the Start screen, slide up from the middle of the screen to see the Apps view. (If you’re using a mouse, click the arrow near the lower-left corner of the screen.)

Step 2

Press and hold or right-click to select the apps you want to pin. (To select multiple apps with a mouse, press and hold Ctrl and then right-click each app.)

Step 3

Tap or click Pin to taskbar.

--------------------------------------------------------------------------------
Pinning apps you have open

If you're already using an app, you can pin it to the taskbar without going to the Start screen.

Step 1

Press and hold the app's taskbar button and slide your finger up until a menu appears. (If you're using a mouse, right-click the app button on the taskbar.)

Step 2

Tap or click Pin this program to taskbar. The app you pinned will stay on your taskbar even after you close the app.

Switching between apps on the taskbar

When you're using an app, you can bring up the taskbar to quicky switch back to a different app or to go back to Start.

To see the taskbar when you're using an app that takes up the whole screen, move your mouse pointer below the bottom edge of the screen. Then, click the Start button to go back to Start, or click another app button to switch to a different app.

http://comphow.blogspot.in

How to keep your information in sync in windows

How to keep your information in sync in windows

(Note

here we are talking about windows os)

Keeping track of all your information can become a chore if you keep your files in different locations. Perhaps you store some files on a computer, others in folders on a network server, and still others on mobile devices such as portable music players, personal digital assistants (PDAs), or mobile phones.

How can you be certain you’re working with the most recent versions of your files when you have copies scattered everywhere? And how can you make sure you have all the files you want on the computer, server, or mobile devices you use without spending a lot of time copying files manually? The easiest and most efficient way is to sync your files automatically using Sync Center.

What is sync?

In Windows, sync (short for synchronization) is the process of keeping files in two or more locations matched with each other.

Sync can be one way or two way. In one-way sync, every time you add, change, or delete a file or other information in one location, the same information is added, changed, or deleted in the other location. But no changes are ever made to the first location because the sync is only one way.

In two-way sync, files are copied in both directions, keeping files in sync in two locations. Every time you add, change, or delete a file in either location, the same change is made in the other sync location. It doesn't matter whether you made the changes on a computer, a mobile device, or a folder on a network server; the same changes will be made in both locations. Two-way sync is commonly used in work environments, where files are often updated in more than one location and then synced with other locations.

Where do I go to sync?

Sync Center is the place to go to sync your computer with network folders, mobile devices, and compatible programs. Sync Center can automatically keep your files and folders in sync in different locations.

Open Sync Center by clicking the Start button , clicking All Programs, clicking Accessories, and then clicking Sync Center.

How difficult is it to set up sync?In the past, the sync process was so complex that many people relied on a system administrator to set up sync for them. With Sync Center, you can do it yourself. There are no server settings to worry about, even if you sync with a folder on a network server. All you have to do is tell Sync Center what files and folders you want to sync, where to sync them, and when. This set of rules—which represents a partnership between two or more sync locations—is called a sync partnership.

How does sync work?

Every time you sync files between two locations (such as between a computer and a mobile device), Sync Center compares the files in both locations to see if they still match or if any have changed. It determines if any files need to be updated in order to stay in sync.

• If the files differ, Sync Center determines which version of each file to keep and copies that version to the other location, overwriting the other version there. It selects the most recent version to keep, unless you have set up the sync partnership to sync differently.
• If a file has changed in both locations since the last sync, Sync Center flags this as a sync conflict and asks you to choose which version to keep.
• If the files are identical in both locations, Sync Center does nothing because the files are already in sync.
• If you have added a new file in one location but not the other, Sync Center will copy the file to the other location.
• If you have deleted a file from one location but not the other, Sync Center will delete the file from the other location.

What are some of the different ways I can sync?

The following scenarios illustrate several of the most common and useful ways to keep your information in sync. Using Sync Center, you can sync:

• Music stored on a portable music player and music stored on a computer. You store your main collection of music on your computer, and you want to make sure that any music you add to or delete from your computer is also added to or deleted from your portable player. But you don't want any songs you delete from your portable player to be deleted from your computer, so you create a one-way sync partnership between your computer and music player. If you add or delete any music on your computer, Sync Center will add or delete the same songs on your music player.
•   Files stored on a computer and in a network folder. You work collaboratively with your colleagues on a set of documents stored on a network server. You set up an Offline Files sync partnership with this network folder. Now any time you disconnect your computer from the network or the server loses its network connection, you can continue working on those files without interruption. The next time you reconnect to the network folder, any changes you have made are also made to the files in the network folder.
  
  Now one of most offten question you should ask yourself before syncronising

  How often can I sync?You can schedule Sync Center to sync your partnerships as often as you want. You can schedule an automatic sync on a daily, weekly, or monthly basis, or when a specific event occurs, such as every time you log on to your computer. You can also perform a manual sync at any time, such as when you are getting ready to disconnect a mobile PC from the network and want to make sure you have the latest copies of files on a network server.

  
  

  Note

  • The ability to sync with network folders is not included in Windows Vista Starter, Windows Vista Home Basic, and Windows Vista Home Premium.
  
  

---------------------------------------------------------------------
    http://comphow.blogspot.in/

How to Back Up or Transfer Files Between SFTP and Dropbox Using Backup Box

How to Back Up or Transfer Files Between SFTP and Dropbox Using Backup Box

Backup Box has re-branded and is now called Mover^. Moving files from SFTP to Dropbox can be a menial task. If you use a service called Mover, the entire process can be streamlined with a few clicks.

------------------------------------------------------------

Steps

1.Use a tool called Mover. This is a website built entirely to help people transfer files between different services.


                          *************************

2.Quickly create an account on Mover by entering your preferred email and password.

                                          ***********************************

3.Click the "Select Source" and the "+New" buttons to add a new connector

                                            **************************************

4.Choose SFTP. Enter your server credentials

                                 ***************************************

5.Browse to the folder that you wish to transfer. You can also choose the root if you like. This will transfer the directory you have chosen and everything within it.

                                             ***************************************

6.Authorize your Dropbox account by clicking "Select Destination" Choose Dropbox and a new tab will open and you will have to enter your Dropbox account details. Pick a friendly name, and then click "Add this connector". Allow the Mover app to connect to your Dropbox.

                                                  *************************************

7.Browse to the folder where you wish to receive your files.

                                               ***************************************

8.Choose whether you want to archive and timestamp this transfer. This is useful for backups.

                                           ****************************************

9.It's time to set your transfer in motion! Review everything to make sure that all of your settings are correct. Then finalize the transfer by clicking the "Transfer now" button at the middle center of the screen. You will be given a prompt to accept the transfer, and once you agree, the files will start to move.

                                             **************************************

10.You can also schedule this transfer to happen automatically at a later date.

                                           *****************************************

http://comphow.blogspot.in/

How to Clean a Computer Monitor

Dirt, fingerprints, and unsightly scratches can make a monitor unpleasant to use. It's important to use a gentle cleaning method, as monitors are made with a type of plastic than can be easily scratched by rough cleaning or harsh chemicals. This article will show you how to clean your computer monitor without causing any damage, and fix scratches, if necessary.
------------------------------------------------------------------

Part 1 of 2: Cleaning Your Monitor Safely

1.Turn off the monitor. It's easier to see the dust and dirt when the monitor is off, and safer for you and your computer.

• If you try to clean the monitor while the pixels are firing you may end up damaging the screen.
• While the risk is small, there is the possibility of an electric shock if you clean the monitor while it’s on.
  
  
                            
  ********************************                                                  

2.Clean the frame. Spray windex or another gentle cleaning solution onto a clean cloth and use it to wipe the casing around the screen.

• The casing is made with durable plastic, so it's fine to scrub a little if you need to remove bits of grime.
• Don't spray the cleaner directly onto the casing, since you might accidentally get some on the screen, and some of it might drip into crevices and get inside.
• Clean the monitor's base, the buttons, and the back of the monitor. Wrap a corner of the cloth around your finger or a toothpick to clean out the hard-to-reach crevices.
• If your monitor has any cords attaching it to the CPU or power, unplug these and give them a good cleaning too.
  
                                          *********************************
  
  3.Wipe the monitor with a clean, soft piece of fabric. Microfiber cloth is ideal. This type of anti-static cloth doesn't leave a lint residue on the screen, and it's soft enough that it won't scratch the surface. Wipe off any visible dust, dirt and grime with the cloth.
• Don't use towels, paper products or other scratchy cloth to wipe the screen. These will leave lint and may cause scratches.
• Disposable dusting cloths, such as Swiffer cloths also work well.
• Don't press hard on the screen or try to scrub it. You might damage it and cause discoloration to occur next time you turn it on.
• If your screen is very dirty, rinse or change the cloth in-between passes. Clean gently and gradually.
  
                                          **********************************
  
  
  4.Avoid using ammonia or acetone-based products. These can easily damage your screen, especially if it has a matte, anti-glare finish.
• Use plain water as much as possible to wipe your screen.
• Consider buying a specifically formulated screen cleaning fluid. Read reviews and check your users manual to make sure which are safe for your particular monitor.
• For a mild homemade cleaner, mix water and white vinegar in equal proportions. Use this to dampen (not wet) your cleaning cloth.
• Alternately, mix vodka or isopropyl alcohol in equal amounts for another homemade cleaner.
• Always apply any liquid to the cloth, not directly to the screen, to prevent dripping.
• Don’t use anything soapy that can leave a residue.
  
                                          ***********************************
  
  
                                                                             
  
  
  
  5.Consider using screen wipes. These are convenient and specifically designed for monitors.
• Make sure they are gentle enough for anti-glare screens, if you have one.
• Read reviews online or ask a salesperson to find a good brand.
  
  
  
  
  
  
  
                                             ***********************************
  
  
  6.For stubborn stains, gently wipe the spot on the screen. Use a gentle, circular rubbing motion to remove the spot, whether it's sticky food residue, ink or another substance.
• Don't rub or scrub too hard.
• Be patient; it might take a few moments for the solution to soak into the spot enough to adequately remove it.
• To help the solution soak in, hold the dampened cloth over the spot for a little while.
• Avoid the temptation to spray the solution directly onto the screen if the spot is stubborn.
• When the spot has been removed, wipe the area dry with a clean part of the cloth.
  
                                             ************************************
  
  7.Make sure everything is dry before turning on your monitor. This prevents any moisture that may have gotten into your monitor from causing damage, or electrical shock.
  
                                            *************************************
                                            *************************************
  
  

  Part 2 of 2: Fixing Scratches

  
  

  

  
  

  1.Check your warranty. If your monitor has a scratch, you may be able to get it replaced.

  • Check the warranty that came with your monitor to find out what your options are.
  • Once you start trying to repair the scratch yourself, further damage may no longer be covered by your warranty.

                       *****************
  

  2.Buy a scratch repair kit. Computer stores and computer sections of department stores sell scratch repair kits for LCD monitors.

  • Check online reviews to find out the best formulation for your particular scratch.
  • Follow the instructions for applying the scratch solution to your screen.
    
                                      ********************************
    
    3.Try petroleum jelly for a temporary fix. Use a cotton swab to apply a thin layer of jelly over the scratch.
  • If the scratch is small, a bit of petroleum jelly is a safe option.
  • It won't repair the scratch, but it will make it look more discreet.
    
                                    **********************************
    
    4.Use a bit of toothpaste to buff out the scratch. Make sure it is not the gel-type, as this will not work.
  • Work the toothpaste over the scratch with a microfiber or other soft cloth.
  • Let it dry, then wipe off with a clean, barely damp cloth.
    
                                    **********************************
    
    
    5.Use baking soda to buff out the scratch. A paste of baking soda and water may also be used to remove small scratches.
  • Mix 2 parts baking soda with 1 part water. Add more baking soda if needed to make a thick paste.
  • Work the paste over the scratch with a microfiber or other soft cloth.
  • Let it dry, then wipe off with a clean, barely damp cloth.
    
                                    **********************************
    
    
    6.Try rubbing compound for severe scratches. Rubbing compound can be found online or at auto supply stores. 
  • Be very careful when using this. Limit it to the damaged area only, and consider doing a spot test on the corner of your screen.
  • Rub a very small amount on your screen with a q-tip, and work back and forth until the scratch is minimized.
  • Let it sit for a few minutes, then wipe off carefully.
  • Clean the screen very well afterwards with a clean cloth and screen cleaning fluid or dilute vinegar.
    
                                   ***********************************
    
    
    7.Use clear lacquer. Consider this option for very old monitors, or where the scratch might get bigger if not addressed. This will cause a bit of haziness on the screen where the lacquer was applied.
  • Cut a hole in a piece of paper. The hole should be slightly larger than the scratch. Use this to mask off the screen. and make sure everything is covered (keyboard, buttons, etc) except the scratch.
  • Spray a thin coat of lacquer onto the paper, over the hole, to “stencil” the lacquer onto the scratch. Remove the paper carefully afterwards, to avoid smearing.
  • Alternately, clear nail polish applied to the scratch may also prevent it from becoming larger. Use a small brush or toothpick to carefully apply the lacquer to the scratch.
  • Clear lacquer may be found in craft stores and places where spray paint is sold.
  • Make sure the lacquer is completely dry before you turn on your screen.
  • Always use lacquer in a well-ventilated area.
  • Make sure your screen is completely clean before applying lacquer.
    
                                  **************************************
    
    
    8.Know that these methods are to be used at your own risk, and may damage your screen.
  • For glare-reducing screens, this can create a “shiny spot” on the screen.
  • Consider the risk of these options as trade-offs, rather than having an annoying scratch.
  • Remember to use your best judgement and apply these methods conservatively.
    
    
    ******************************************************************
    
    
    http://comphow.blogspot.in/

  
  

How to Configure a VPN

A Virtual Private Network (VPN) allows you to connect to a private network from anywhere that you have internet access. While this is very beneficial to corporate users, it can be useful for home users as well. Setting up a VPN will allow you to access files and printers on your home network while away somewhere else. Data transferred through a VPN is encrypted, so your information is protected from snoopers. Follow this guide to connect to and set up a VPN.

----------------------------------------------------------------

Method 1 of 3: Connecting to an Existing VPN

1.Connect using Windows Vista/7/8. Open the Network and Sharing center. You can access this by searching for “network and sharing” and selecting it from the results list.

• Click the “Set up a new connection or network” link. In Vista, this will be located in the sidebar.
• Scroll down and select “Connect to a workplace”.
• If you have a wireless connection already select No,create a new connection.
• Select “Use my Internet connection (VPN)”.
• Enter the VPN information. In the “Internet address” field, enter in the server domain name or IP address. Enter any description you would like in the “Destination name” field. Click Next when ready.
• If you’re setting the connection up for later, select the “Don’t connect now” box.
• Enter your login information if you want. When creating the connection, you are given the option to enter your username and password for the VPN. If you’d rather be prompted for this when you start the connection, leave the fields blank and click Create.
• If you didn’t check the “Don’t connect now” box, you will need to enter the login information now, as Windows will attempt to connect to the VPN when you click the Create button.
• Connect to the VPN. When you want to connect to the VPN, click on the Network icon in your system tray. Your VPN will be listed in the available networks list. Select it and enter your login information to connect

----------------------------------------------------------------

2.Connect using Mac OS X. Click the Apple menu and select System Preferences. Open the Network section.

• Click the (+) button at the bottom of the list on the left. Select VPN from the Interface menu.
• Select the type of VPN that you are connecting to. You can ask your VPN operator what type of VPN you are connecting to.
• Label the VPN however you see fit in the “Service Name” field. Click the Create button once you are finished.
• Enter the VPN and log in information. Enter the domain or IP address of the VPN server into the “Server Address” field. Enter your username and password provided by the administrator of the VPN.
  • Check the “Show VPN status in menu bar” box to have the VPN appear in your status bar near the normal connection icon.
• Click Connect to connect to your newly configured VPN

----------------------------------------------------------------

3.Connect to a PPTP VPN using Linux. In order to connect to a VPN, you will need to install the Network Manager applet. Most Linux distributions come with this preinstalled, but you will still need to install a plugin specific to the type of VPN you are connecting to. Your VPN administrator can tell you the type of VPN you are using.

• Download the Network Manager applet and plugin. You can install both the applet and the plugin at the same time with the following command. Note, this is for PPTP VPN connections, the most common type for home users and small businesses:
  sudo apt-get install network-manager-gnome network-manager-pptp
  • If you already have the Network Manager applet and just need the plugin, remove network-manager-gnome from the above command.
  • Once the installation is complete, restart the applet with the command:
    sudo NetworkManager restart
• Click on the Network Manager icon. Select the VPN tab. Click the Add button to create a new VPN connection.
• Enter your VPN information. In the “Gateway” field, enter the IP address or domain of the VPN that you are connecting to. Enter the username and password that you received into the appropriate boxes.
• Click the advanced button. You will need to make a few settings adjustments before you can connect.
  • Uncheck PAP and EAP in the Authentication field.
  • Check CHAP, MSCHAP, and MSCAPv2 in the Authentication field.
  • Check the “Use Point-to-Point encryption (MPPE)” box.
  • Select 128-bit encryption in the Security pulldown menu.
  • Check “Allow stateful encryption” and “Send PPP echo packets”. Uncheck everything else.
• Connect to the VPN. Once you are finished making changes, right-click on the Network Manager icon and select your VPN. You may need to restart your computer before this appears.

----------------------------------------------------------------

Method 2 of 3: Creating a VPN Server in Windows

1.Configure your router. You will need to open a port on your router that points to the IP address of the computer hosting the VPN. Enter your router’s IP address into a web browser address bar. This is typically 192.168.1.1, 192.168.0.1, or 192.168.2.1. Refer to your router’s documentation for details.

• Navigate to the Port Forwarding section. This may be labeled Virtual Servers or Applications.
• Create a new port forwarding entry. Set the external port to something random, such as 23452. Set the internal port to 1723. Forward to port to the IP address of the computer running the VPN server.

----------------------------------------------------------------

2.Open the Network Connections window. You can access this directly by searching for “ncpa.cpl”. Click on the result in the search list.

----------------------------------------------------------------

3.Press the Alt button to show the menu bar. Click File and select “New Incoming Connection”.

----------------------------------------------------------------

4.Determine which users can connect to the VPN. By default, the list will include users registered on your Windows network. You can add other users by clicking the “Add someone…” button. You can create new usernames and passwords this way.

----------------------------------------------------------------

5.Check the “Through the Internet” box. This will allow users to access the VPN using any internet connection.

----------------------------------------------------------------

6.Decide whether or not to share your files. Depending on who you are giving access to your VPN to, you may want to disable “File and Printer Sharing” to protect the security of your files. If you are using the VPN to access your files remotely, leave this checked.

----------------------------------------------------------------

7.Copy down the computer name. Connecting users will need to enter this when they make the connection to the VPN.

----------------------------------------------------------------

8.Check your VPN connection. Open the Network Connections window again (ncpa.cpl). Your VPN connection should appear in the list, and will notify you if other clients are currently connected to it

----------------------------------------------------------------

Method 3 of 3: Creating a VPN Server With Third-Party Programs

1.Find a VPN program that suits your needs. There are a variety of programs available for setting up a personal VPN. Many are paid products, but some offer free versions for basic users. LogMeIn Hamachi and OpenVPN are two such programs. If you use the free version of Hamachi, you are limited to 5 connections to your VPN, which is usually enough for most personal users.

• For Mac OS X, check out iVPN as well. Hamachi works on Mac OS X too.
• This section will be based on LogMeIN Hamachi.

----------------------------------------------------------------

2Install the VPN program on an always-on computer. In order for Hamachi to be effective at creating a private network, the server should be configured on a computer that is generally always connected.

• When you run Hamachi for the first time, click the blue Power button to start the server program.
• Select the Network menu, and then choose “Create a new network”.
• Enter a network name of your choice and create a strong password.
  

  ----------------------------------------------------------------
  

  3.Install the VPN program on the computers that you want to connect to the VPN. Each client that you want to connect will need to have the VPN program installed.
• On the connecting computer, open the VPN program. Open the Network menu and select “Join an existing network”.
• Enter the network information, including the network name and password. Press connect and you will be connected to the Hamachi VPN.

----------------------------------------------------------------
http://comphow.blogspot.in/

How to Access Another Computer from Your Computer

How to Access Another Computer from Your Computer

Ever wish you could access some files on your work computer when you’re sitting in your home office? Need a report from your home computer that’s due in class? You can configure your computers to be accessible anywhere in the world, from virtually any other computer. There are a variety of ways to do this, including built-in tools, downloadable programs, and browser-based solutions. Read on after the jump to learn how.


----------------------------------------------------------------

Method 1 of 3: Using Windows Remote Desktop1.Enable Remote Desktop on the computer you want to access. On the Windows PC that you want to access, you will need to enable Remote Access so that other computers can connect to it. You can enable this on the Pro or Enterprise versions of XP, Vista, 7, and 8. This method requires that you be on the same network as the computer you want to access, either through the router or through a VPN.

• Press the Windows key + Pause to open the System menu. An alternative method is to click the Start menu, open up the Control Panel, click System and Security, then click System.
• Click the “Remote settings” link on the left side of the window.
• Check the “Allow remote connections to this computer” box. You can adjust some of the advanced options, such as length of time an invitation is good for, by clicking the “Advanced” button.

                                         ----------------------------------------------------------------

2.Add users. You will need to set which users can log in remotely on that machine. Click the “Select Users” button, and then click the Add button. Choose which users you would like to add.

                               

                                           ----------------------------------------------------------------

3.Find the system name. When you connect to the computer, you will need to know the system name. You can find this by pressing Windows key + Pause and looking for the “Computer name” entry.

                                               ----------------------------------------------------------------

4.Disable Sleep mode. You will not be able to connect to a computer that is Sleeping or in Hibernate. Make sure to disable these if you want to connect remotely.

• Open the Control Panel and then select Power Options. You may have to switch views to see the icon.
• Click the “Change plan settings” link next to your active plan.
• Set Sleep and Hibernate to Never. Click the “Save changes” button when you are finished.

                                         

                                                    ----------------------------------------------------------------

5.Connect to the computer. Log on to the computer that you want to use to connect to the remote computer. Click the Start menu and enter “remote desktop connection” into the Search field. Click it to open it.

• Enter in the system name of the computer that you want to connect to.
• Enter in the user name that you are connecting with.
• Click the “Show options” button to open the advanced options for your connection. You can use these options to tweak your connection to give you the best performance, as well as configure the sound and display.
• Click Connect to start connecting to the computer. When the connection is made, the other computer’s display will appear in a window on your computer. You can navigate Windows just like you normally would.

                                                        ----------------------------------------------------------------

6.Open port 3389 to allow connections through the internet. If you want to be able to connect to your remote computer directly over the internet, without having to use a VPN, you will need to open port 3389 on the firewall of the computer you are connecting to. This will expose the Remote Desktop to the internet, meaning potentially anyone access it. For this reason, it is highly recommended that you have a very strong password.

• Once you open port 3389, you will be able to connect to the computer by entering its public (external) IP address. To find the public IP address, check out this guide. Remember, you will need the IP address of the computer you are connecting to.
  
  

                                              ----------------------------------------------------------------

  7.Connect to your remote desktop with a smartphone or tablet. If you are running Windows 8 0r 8.1 Professional, you can connect to your remote desktop through the official Microsoft apps on iOS and Android. You will need to have Remote Desktop configured on your computer.
  
  

  Method 2 of 3: Using TeamViewer for Any System:-

  
  
  1.Download TeamViewer. This is a free program for home users that allows you to quickly set up a remote connection between your computers. This programs is especially useful for Mac computers, as configuring native remote desktop connections is very tricky and potentially expensive. It is also useful for Mac-to-PC connections and vice versa.
• Besides TeamViewer, there are several other popular programs available, such as LogMeIn, WebEX, LapLink, RealVNC, and GoToMyPC.
  
                               ----------------------------------------------------------------
  
  
  2.Install TeamViewer on the remote computer. When you start the installer, you will be asked if you want to Install or Run TeamViewer. Select Install to configure TeamViewer on the computer, allowing you to connect to it anytime.
• Check the “Show advanced settings” box.
• Select “personal/non-commerical use”.
• Read and accept the license agreement.

----------------------------------------------------------------

3.Configure TeamViewer for later remote connections. Make sure “Yes” is checked before continuing the installation. TeamViewer will be configured so that you can connect to it from any computer over the internet.

• Make sure that “Full access” is checked so that you can access the computer remotely without having to approve it on the remote computer.

----------------------------------------------------------------

4.Start the “Unattended access” setup process. After installation is complete, the “Unattended access” wizard will start. Follow the steps laid out in the wizard to complete the setup.

• You will need to give your computer a name as well as a password. Make sure that the password is strong to prevent unwanted intruders.

----------------------------------------------------------------

5.Create a TeamViewer account. This will allow you to quickly see which of your remote computers are online and available to connect to. Once your account is created, you will see your computer appear on the list in TeamViewer.

----------------------------------------------------------------

6.Keep TeamViewer running. TeamViewer will need to be running in order to connect to that computer. TeamViewer runs in the background, and takes minimal system resources.

----------------------------------------------------------------

7.Connect to the computer remotely. Once TeamViewer is configured on the remote computer, you can connect to it from another device. You can do this by logging into the TeamViewer website and connecting through the browser, or by downloading and installing the TeamViewer program on that computer.

• You will need to log in and use your password to connect to the remote computer.
                               ----------------------------------------------------------------
  

  Method 3 of 3: Using Google Chrome Remote Desktop for Any System

  1.Install the Remote Desktop Chrome extension. You can find this in the Google Chrome web store, and it is a free download. Be sure to only install the extension from the Google Chrome team.
• You will need to install the Chrome extension on the computer you want to connect to and the computer you are connecting from.
• You can install the Chrome extension on Windows, Mac and Linux computers, and virtually any modern version can run it.

----------------------------------------------------------------

 

2.Enable remote access. On the computer that you want to connect to, open the Remote Desktop app that you installed in Chrome. Sign in with your Google account if you are not already, and then click the “Enable remote connections” button.

                                      ----------------------------------------------------------------

3.Create a PIN. As an extra layer of security, you can create a PIN that will be required whenever you start a connection. This will help protect your computer even if someone is able to compromise your Google account.
                                     ----------------------------------------------------------------

4.Install the components. Once you create your PIN, the remote connection software will be installed on the computer. You may need to accept these installations, depending on the security settings on your computer.
                                     ----------------------------------------------------------------

5.Disable Sleep mode. You will not be able to connect to a computer that is Sleeping or in Hibernate. Make sure to disable these if you want to connect remotely.

• Open the Control Panel and then select Power Options. You may have to switch views to see the icon.
• Click the “Change plan settings” link next to your active plan.
• Set Sleep and Hibernate to Never. Click the “Save changes” button when you are finished.

                                    ----------------------------------------------------------------

6.Connect to the computer. On the computer you are using to connect with, open the Chrome Remote Desktop app. Click the “Get started” button and select the computer that you want to connect to. You will be asked for the PIN, and then you will be connected.

• You will only be able to choose computers that you have previously linked with your Google account.

                                    ----------------------------------------------------------------

7.Use the remote computer. Your remote computer’s display will be shown in your Google Chrome browser. You may experience a slight delay when using the remote computer, as commands need to be sent through the internet in order to reach it.

• Click the Disconnect button in the top menu to end the connection.
• Use the Send Keys button to send key commands to the remote computer, such as Ctrl + Alt + Del and Print Screen.

                                       ----------------------------------------------------------------

8.Share your screen temporarily. If you want to share your screen with someone on a temporary basis, such as for technical support, you can use the Remote Assistance option. Click the Share button on the Chrome Remote desktop main menu, and then copy the code that is displayed. Give this code to the person that is assisting you, and they will be able to connect through the Chrome Remote Desktop app on their computer.


                                      ----------------------------------------------------------------

http://comphow.blogspot.in/http://comphow.blogspot.in/